MURR
7000-12491-0000000 SENSÖR SOKETİ M12 0-DER MALE
7000-12491-0000000
Fiyat için teklif isteyin
Bu ürün şu an satışa kapalı; güncel fiyat için aşağıdan teklif formuna ekleyin.
Teklif İste'ye basınca ürün toplu teklif formunuza eklenir; satış ekibimiz fiyat/temin süresiyle döner. Dilerseniz +90 (262) 335 14 55.
Fiyatlara KDV dahil değildir. Stok ve fiyatlar Mikro ERP ile anlık güncellenir.
Ürün Kodu
7000-12491-0000000
Marka
MURR
Birim
AD
Ürün Açıklaması
4-pol., 0,14 - 0,34mm², 2,9 - 5,1mm
Side 1
- Family construction form: M12
- No. of poles: 4
- Coding: A
- Gender: male
- Mounting method: inserted, screwed
- Threaded hole: M12 x 1
- Tightening torque: 0,6 Nm
- Cable outlet: straight
- Material contact: Brass
- Coating contact: gold plated
- Degree of protection (EN IEC 60529): IP67, IP65
Side 2
- Mounting method: Field-wireable
Electrical data
- Contact resistance max.: 10 mΩ
Electrical data | Supply
- Operating voltage AC max.: 32 V
- Operating voltage DC max.: 32 V
- Current operating per contact max.: 4 A
Installation
- Single wire diameter min.: 0,1 mm
- Connection cross section min.: 0,14 mm²
- Connection cross section max.: 0,34 mm²
Installation | Connection
- Connection: Cut clamps IDC
- Tightening torque: 0,6 Nm
- Mating cycles min.: 100
- Wire insulation diameter min.: 1 mm
- Wire insulation diameter max.: 1,6 mm
Device protection | Electrical
- Additional condition protection degree: inserted, screwed
- Pollution Degree: 3
- Rated surge voltage: 1,5 kV
- Material group (IEC 60664-1): I
Mechanical data | Material data
- housing: PA
Mechanical data | Mounting data
- Height: 43 mm
- Width: 15 mm
- Depth: 15 mm
- Mounting method: inserted, screwed
- Looking techniques: Screw locking
- Clamping range min.: 2,9 mm
- Clamping range max.: 5,1 mm
Environmental characteristics | Climatic
- Operating temperature min.: -40 °C
- Operating temperature max.: 85 °C
Important installation notes
- Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.
- Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties.
Conformity
- Product standard: EN IEC 61076-2-101 (M12), EN 45545-2, EN 50155
- Shock and vibration resistance: EN/IEC 61373
- Fire protection: EN 45545-2, HL1-HL3, requirement sets R22, R23, R24