0 262 335 14 55
Orijinal & Faturalı Ürün
Aynı Gün Kargo (16:00'a kadar)
B2B Kurumsal Vade İmkânı
TÜM KATEGORİLER Hareket Kontrol Fabrika Otomasyonu Proses Otomasyonu Şalt Malzeme DI TEKLİF AL
7000-12901-0000000 MURR M12 SOKET FEMALE
Teknik Doküman
MURR

7000-12901-0000000 MURR M12 SOKET FEMALE

7000-12901-0000000 · Barkod: 7000-12901-0000000
Stokta
Fiyat için teklif isteyin
Bu ürün şu an satışa kapalı; güncel fiyat için aşağıdan teklif formuna ekleyin.
Geçici olarak satışa kapalı

Teklif İste'ye basınca ürün toplu teklif formunuza eklenir; satış ekibimiz fiyat/temin süresiyle döner. Dilerseniz +90 (262) 335 14 55.

Bu ürün şu an satışa kapalıdır; güncel fiyat için teklif formundan iletişime geçin.
Ürün Kodu
7000-12901-0000000
Marka
MURR
Barkod
7000-12901-0000000
Birim
AD

Ürün Açıklaması

4-pol., max. 0,75mm² 4 - 6mm

Side 1

  • Family construction form: M12
  • No. of poles: 4
  • Coding: A
  • Gender: female
  • Mounting method: Field-wireable
  • Threaded hole: M12
  • Tightening torque: 0,6 Nm
  • Width across flats: SW18
  • Cable outlet: straight
  • Material: PA
  • Material contact: Brass
  • Degree of protection (EN IEC 60529): IP67

Side 2

  • Mounting method: Field-wireable
  • Cable outlet: straight

Electrical data | Supply

  • Operating voltage AC max.: 250 V
  • Operating voltage DC max.: 250 V
  • Current operating per contact max.: 4 A

Installation

  • Connection cross section max.: 0,75 mm²
  • Cross section connection without wire end ferrule AWG max.: 18 AWG

Installation | Connection

  • Tightening torque: 0,6 Nm

Device protection

  • Shielded: No

Device protection | Electrical

  • Additional condition protection degree: inserted, screwed
  • Pollution Degree: 3
  • Overvoltage category (EN 60664-1): II
  • Rated surge voltage: 2,5 kV
  • Insulation resistance min.: 100 mΩ
  • Material group (IEC 60664-1): III

Mechanical data | Mounting data

  • Height: 54 mm
  • Width: 20 mm
  • Depth: 20 mm
  • Mounting method: inserted, screwed, Shaking protection
  • Clamping range min.: 4 mm
  • Clamping range max.: 6 mm

Environmental characteristics | Climatic

  • Operating temperature min.: -40 °C
  • Operating temperature max.: 85 °C

Important installation notes

  • Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.
  • Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties.
  • Note on mounting: The plug connectors must not be connected or disconnected under load. Non-compliance and improper use can result in personal injury., The user must take suitable safety precautions to ensure that the plug connector cannot be accidentally disconnected., To

Conformity

  • Product standard: EN IEC 61076-2-101 (M12)
Paylaş: WhatsApp LinkedIn X E-posta