0 262 335 14 55
Orijinal & Faturalı Ürün
Aynı Gün Kargo (16:00'a kadar)
B2B Kurumsal Vade İmkânı
TÜM KATEGORİLER Hareket Kontrol Fabrika Otomasyonu Proses Otomasyonu Şalt Malzeme DI TEKLİF AL
7000-14801-0000000 M12 MALE 0° D-COD. PUSH-IN
Teknik Doküman
MURR

7000-14801-0000000 M12 MALE 0° D-COD. PUSH-IN

7000-14801-0000000 · Barkod: 7000-14801-0000000
Stokta
Fiyat için teklif isteyin
Bu ürün şu an satışa kapalı; güncel fiyat için aşağıdan teklif formuna ekleyin.
Geçici olarak satışa kapalı

Teklif İste'ye basınca ürün toplu teklif formunuza eklenir; satış ekibimiz fiyat/temin süresiyle döner. Dilerseniz +90 (262) 335 14 55.

Bu ürün şu an satışa kapalıdır; güncel fiyat için teklif formundan iletişime geçin.
Ürün Kodu
7000-14801-0000000
Marka
MURR
Barkod
7000-14801-0000000
Birim
AD

Ürün Açıklaması

4-pol., 0,14 - 0,75mm², 4 - 8mm, shielded, CAT5

Side 1

  • Family construction form: M12
  • No. of poles: 4
  • Coding: D
  • Gender: male
  • Mounting method: inserted, screwed
  • Tightening torque: 0,4 Nm
  • Cable outlet: straight
  • Material contact: Bronze
  • Degree of protection (EN IEC 60529): IP67, IP65

Side 2

  • Family construction form: Push-Lock spring clamp connection
  • Mounting method: Field-wireable

Electrical data | Supply

  • Operating voltage AC: 48 V
  • Operating voltage DC: 60 V
  • Current operating per contact max.: 4 A
  • Operating voltage DC (UL-listed): 60 V
  • Current operating per contact (UL): 4 A

Industrial Communication

  • Data transmission rate max.: 100 Mbit/s
  • Transfer parameters: CAT5, Class D (ISO/IEC 11801:2002), (EN 50173-1)

Diagnostics

  • Status indication LED: No

Installation

  • Cross section connection with wire end ferrule min.: 0,14 mm²
  • Cross section connection with wire end ferrule max.: 0,5 mm²
  • Cross section connection with wire end ferrule AWG min.: 28 AWG
  • Cross section connection with wire end ferrule AWG max.: 20 AWG
  • Cross section connection without wire end ferrule min.: 0,14 mm²
  • Cross section connection without wire end ferrule max.: 0,75 mm²
  • Cross section connection without wire end ferrule AWG min.: 26 AWG
  • Cross section connection without wire end ferrule AWG max.: 18 AWG

Installation | Connection

  • Mating cycles min.: 100
  • Connection information: Push-Lock spring clamp connection

Device protection

  • Shielded: Yes

Device protection | Electrical

  • Additional condition protection degree: inserted, screwed
  • Pollution Degree: 3
  • Overvoltage category (EN 60950-1): II

Mechanical data | Material data

  • housing: Zinc die-casting
  • Material contact carrier: PA66
  • Material contact: Bronze
  • Coating contact: gold plated
  • Locking material: Zinc die-casting
  • Coating locking: Nickeled
  • Gasket: NBR
  • Combustibility class (UL94): V-0

Mechanical data | Mounting data

  • Mounting method: inserted, screwed, Shaking protection
  • Clamping range min.: 4 mm
  • Clamping range max.: 8 mm

Environmental characteristics | Climatic

  • Operating temperature min.: -40 °C
  • Operating temperature max.: 85 °C

Important installation notes

  • Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.
  • Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties.

Conformity

  • Product standard: EN IEC 61076-2-101 (M12)
Paylaş: WhatsApp LinkedIn X E-posta